A majority of networking devices work on two frequencies 2.4GHz and 5GHz. The first one has longer range and has lesser speeds where the 5GHz is the exact opposite of the 2.4GHz band. WiFi range extenders launched by Setek are also dual-band devices. So, no matter whether you own a Setek Superboost WiFi extender or have installed a Setek SE-01 extender, all you will get is enhanced WiFi coverage for both bands. But, it has been noticed that some users have complained about their Setek WiFi extender not connecting to 5GHz band.
One of the major reasons why this happens is that the extender and router are sharing a large distance. As we mentioned at the beginning of the post that 5GHz band is the exact opposite of the 2.4GHz frequency, it has lower range than the 2.4GHz band. From this fact, it can be clearly seen that your router and extender are supposed to share a very finite and decent distance. You can check the exact value from the user manual of your Setek range extender. However, we can give you a universal advice. You are not allowed to keep your devices too close. Otherwise, there are chances that the WiFi signals of your devices will clash. In case, mending the distance doesn’t help you out, consider giving a shot at the hacks mentioned below.
Solutions: Setek WiFi Extender Not Connecting to 5GHz
-
Restart Your Extender: At times, technical glitches stop the extender from getting connected to the 5GHz frequency band. In those times, you are advised to perform a simple reboot of the extender since it helps in getting rid of technical glitches. Restarting is a simple process that involves powering down of the extender for a few minutes and then powering it up once again. But, ensure to disconnect your extender from the main router and other devices during this process.
-
Change the Location: The poor location of the range extender can also be the reason why the Setek is not connecting to the 5GHz frequency band. To check the same, you are advised to have a look at the surroundings of your range extender. If it is seen housing device that emit electromagnetic frequencies (microwave ovens, televisions, refrigerators, baby monitors, Bluetooth speakers, etc.) you have to change the location of your extender. Additionally, be sure that you have not kept the extender near an object containing a large amount of water or reflexive surfaces.
-
Update the Firmware: The outdated firmware of the extender can also force you to face the issue with the 5GHz connection. You need to understand that for optimal performance, your WiFi range extender is supposed to flaunt the latest firmware version. Therefore, without waiting, access the dashboard of your range extender on a device connected to its network. Once done, log in to it, and upgrade the firmware to the latest version. Just make sure that you are uploading the right firmware file on the extender. Updating the firmware will also help you fix the Setek WiFi extender blinking issue in case you are facing it.
The Final Thoughts
With the hope that you will be able to connect your Setek WiFi range extender to the 5GHz frequency band, we are now about to wrap up the post. You learned how a few hacks can help you do away with the issue. Just in case those hacks fail to help you out, it is recommended that you pull out the final card of resetting the range extender. It is not difficult to follow as you have to press the Reset button using a sharp object. Very soon, the extender will start working on the default settings and you will be able to set it up once again.
