A large proportion of users have added WiFi repeaters in their houses with a hope that they will be able to take the benefits of the enhanced WiFi range. But, even after performing Wireless-N WiFi repeater setup, some users seem unhappy. If you are also not every much happy with the outputs delivered by your Wireless-N repeater, it is high time that you pay some attention to the techniques mentioned in this post. Wondering what are they for? Well, they are going to help you improve the performance of your Wireless-N repeater a lot. Thus, don’t skip a point.
How to Improve Wireless-N Repeater Performance?
-
The Location Should be Optimal
No matter what, you must always place your Wireless repeater in a ventilated room. It has two benefits. The number one benefit you will be reaping as a result of this will be proper transmission of signals throughout the house. On the other hand, the second benefit will be that the repeater won’t overheat which is again a good thing as it will prevent your repeater from becoming a victim of technical glitches.
Apart from being placed in a ventilated area, your repeater must not be placed near any device that emits electromagnetic radiation. To be very specific, keep the repeater away from microwave ovens, televisions, refrigerators, washing machines, baby monitors, etc. Know that the signals emitted by the extender/repeater are also electromagnetic that are likely to mess with those emitted by other gadgets present in your house.
The repeater should not be placed near any object that contains a large amount of water. A fish tank or a geyser is a prime example. If we go deeper into the concept of WiFi interference, then your router is supposed to be placed away from reflexive surfaces and metal objects.
-
Keep the Firmware Updated
If you are no so new to the technical realm, then you might have heard the word firmware. If yes, then you might be well familiar with the fact that all networking devices run with the help of their respective firmware. Now, let us tell you one thing that the firmware of these devices needs to be updated. If you keep ignoring the firmware update, there are high chances that the performance of your device will degrade.
So, you must update the firmware of your Wireless-N WiFi repeater if you want it to perform optimally always. To do that, you are suggested to access the 192.168.10.1 WiFi repeater setup IP address and log in to the repeater. After reaching there, upload the repeater’s latest firmware file when asked for.
However, while upgrading the firmware of your repeater, you need to be extra careful. The reason being, uploading the incorrect firmware file can make you pay a huge price. Like, it has the tendency to make your repeater non-functional forever. Thus, ensure that the firmware file you are uploading on the repeater’s portal belong to the device model number you own. In addition to that, you are advised to not to disturb the firmware update process since it can ruin the entire plot and you will be left with nothing in hand.
The Bottom Lines
Well, these were just two tips that can help you improve the performance of your Wireless-N WiFi repeater. But, trust us, they have a huge impact on the outputs delivered. Therefore, always consider them when the performance of your repeater is degrading. In addition to these tips, you are suggested to use hardwired connections wherever possible as it will reduce the wireless network traffic. If you can go the extra mile, consider restarting your repeater twice a week. This will keep technical glitches at a bay and help your repeater perform well.
