The Wavlink AC600 setup is simple. First, make sure the extender is plugged into a power source that is connected to your current WiFi network. After turning the extender on, connect your PC or phone to the “Wavlink-Ext” WiFi network by default. Enter “http://ap.setup” in the URL bar of an open browser for the internet. Set the extender settings via the on-screen orders, which include choosing your current WiFi network and providing the password. The Wavlink AC600 extender can strengthen the signal from your WiFi when setup is complete, expanding coverage to places with spotty or nonexistent access. Take use of an expanded and enhanced wireless network with ease.
Requirement for wavlink AC600 setup?
- Ensure you have a power outlet near the area where you want to extend your WiFi coverage
- You’ll use a computer or mobile device to configure the extender. Make sure it can connect to WiFi.
- Have your existing WiFi network name (SSID) and password on hand. You’ll need this information during the setup process to connect
Manual method for wavlink AC600 wifi extender setup?
- Connect an extender to a power supply close to the WiFi network you currently have. With your PC or smartphone, connect to the extender’s built-in WiFiÂ
- network, usually called “Wavlink-Ext.”
- Open a web browser and enter “http://ap.setup” in the URL box to open a browser.
- To get to the extender’s settings, enter the standard login information, most often “admin” for both the username and password.
- Choose your current internet connection from the list and enter its password by following the on-screen directions. Save the settings.
- For better WiFi coverage, rejoin the devices you are using to the extended network after the extender has been configured.
NOTE : If you need any help regarding your wavelink wifi range extender so get in touch with the technician or visit the official web site that is dodocool wifi setup.
wavlink AC600 wifi setup via wps button?
- Connect the extension cable to a power outlet near to the WiFi router you already have.
- Click your router’s WPS button. This usually says “WPS” and, based on your router model, may need just one press or a few seconds of holding.
- Press the Wavlink AC600 extender’s WPS button after a minute of tapping the router’s WPS button. The extender’s WPS LED should start to blink.
- As soon as a connection is made, the extender’s WPS LED will cease flickering and solidify. This means that your current WiFi network and the extender are now connected.
- reposition the extension if the WPS setup is successful but the
Login method in wavlinkAC600 wifi setup
- The xtender to a power outlet that is close to the present WiFi router.
- Press the WPS button that’s on your router. It is typically labelled “WPS” and, based on your router model, may need a quick press or a few seconds of holding.
- Click the WPS button on the Wavlink AC600 extender for two minutes after you have pressed the WPS button on the router. This ought to lead the extender’s WPS LED to start flashing.
- Upon effective establishment of a connection, the extender’s WPS LED will cease to flash and turn solid. It indicates that the extension and your current WiFi network are now in sync.
- In the event that the WPS setup succeeds but the extender’s
Firmware update on wavlink AC600 wifi extender?
- The extension cord to a power outlet that is close to your current WiFi router.
- Press the WPS button that’s on your router. It is typically labelled “WPS” and, according to your router model, may need a quick press or a few seconds of holding.
- Click the WPS key on the Wavlink AC600 extender for two minutes after you have pressed the WPS button on your router. This ought to trigger the extender’s WPS LED to light up.
- After effective establishment of a connection, the extender’s WPS LED will cease to flash and turn solid. It indicates that the add-on and your current WiFi network have become in sync.
- In the case that the WPS setup is successful but the extender’s
How do I reset my wavlinkAC600 wifi?
- Search for the extender’s reset button. Usually, it’s a tiny, recessed button that needs to be pushed with a paperclip or other like device.
- Check that the extender has been turned on and that it is attached to a power source.
- Press and hold the reset button for about ten seconds with a paperclip or other such instrument. Usually located on the rear or bottom of the extender, the reset button may require some force to activate
- Let go of the reset button after the allotted amount of time.
- Upon a reboot, the extender will go back to its factory default settings.