What You Will Need
- SoClean device
- SoClean filter
- Your CPAP mask and tubing
- Water (if you are using a humidifier)
Instructions
- Gather your CPAP equipment. This includes your mask, tubing, and humidifier chamber (if you are using one).
- Place your mask and tubing inside the SoClean chamber.
- If you are using a humidifier, empty the water chamber and place it inside the SoClean chamber.
- Place the SoClean filter in the filter holder.
- Close the lid of the SoClean chamber.
- Press the start button.
- The SoClean will begin cleaning your CPAP equipment. The cleaning process takes about 30 minutes.
- When the cleaning process is complete, the SoClean will beep and the status light will turn green.
- Open the lid and remove your CPAP equipment.
Tips
- For best results, clean your CPAP equipment with SoClean every day.
- If you are using a humidifier, you should empty the water chamber and clean it with SoClean once a week.
- You should also replace the SoClean filter every six months.
Troubleshooting
- If the SoClean does not turn on, check to make sure that it is plugged in and that the filter is properly inserted.
- If the SoClean beeps and the status light turns red, there is a problem with the device. Contact SoClean customer support for assistance.
Safety Precautions
- Do not use SoClean if you are pregnant or breastfeeding.
- Do not use SoClean if you have any health conditions that make you sensitive to ozone.
- Do not place any plants or animals in the same room as the SoClean while it is cleaning your CPAP equipment.
Conclusion
SoClean is a safe and effective way to clean and sanitize your CPAP equipment. It is a convenient and easy-to-use device that can help you get a good night’s sleep knowing that your CPAP equipment is clean and germ-free.
I hope this helps!